Fellowes logo and banner

Office Suites™ Laptop Riser

CRC: 80320
  • Raises your laptop screen to eye-level to help prevent neck strain
  • Height adjustable with six height positions 140mm-190mm
  • Stabilising front edge prevents laptop from sliding off stand
  • Supports up to 5kg
  • Stacks on top of Fellowes Office Suites™ letter trays (8031701)
Office Suites™ Laptop Riser __8032001 Laptop Riser.png
Office Suites™ Laptop Riser __8032001 Laptop Riser.png

btn-buy-online.png

Buy From A Retailer


QRCode

Don't Forget These...

Office Suites™ Microban® Adjustable Footrest__8032201_Hero_Left.png

Office Suites™ Microban® Adjustable Footrest

Office Suites™ Letter Tray__lettertray_80317_LF.png

Office Suites™ Letter Tray


You May Also Like...

Office Suites™ Laptop Riser Plus__8036701d.png

Office Suites™ Laptop Riser Plus



Specs

Item Number8032001
UPC Code043859470952
Item H x W x D (mm)104.00 x 382.00 x 290.00
ColourBlack
Material TypePlastic
Warranty1 Yr LImited
Office Suites™ Laptop Riser 3 5 2 2
Fellowes Laptop Riser # 8032001 The 80320 Does not hold a Dell Laptop 5720 (17R Notebook). In fact Fellowes does not have a riser that has a 1" "lip" required to hold my Dell to PC securely and prevent it from sliding off the riser. While trying to open my Dell 17R Laptop, the 80320 riser collaped because the "lock" mechanism does not lock securely! The slighest movement makes this riser unstable. The two small stops at the forward end that prevents the upper portion of the riser from moving forward are too short in length and too small in diameter. This model is definitely for a lighter PC and one that is much thinner than a Dell 5720 Inspiron bottom half which is 1" high. The better model for the weight on my Dell PC is a #80384 but needs modification to the front physicall stop which is only approximately 0.4" high. Luckily I had a scrap piece of 1/4" thick clear plexiglass and cut a 1" wide stip by approximately 8" long and fastened it using 3, small beveled head (countersink) type screws. This was a tedious fix and I had the hardware - drills, countersink tool and various other small tools to complete the job. I fastened the plexiglass to the existing 0.4" high lip using three screws. I could send a photo to those interested. As a retired mechanical engineer this was not too large a challenge but again tedious and requiring some special hand tools. And very time sensitive. It is NOT a 15 minute job!!!! Fellowes is missing an opportunity here especially for DELL PC's that are larger and heavier than some PC Laptop competitors. It is an "easy" fix but obviously requires retooling for their molding process. August 16, 2012
excellent product - except for Recently purchared a laptop riser. It's a great product but has a major design flaw. The strip mounted on the front edge to keep laptops from sliding off when in the angled position, is too shallow and does not accommodate a Dell Inspiron 17R. This laptop has a rounded front edge on the case and will slide up over top of stop and can fall off. I had to modify mine by adding a Bar Pull (cabinet handle) that is 1 1/2" high and 10" long. My laptop fits just below cross bar, thus saving my laptop from destruction. December 8, 2012
1-2 of 2