Fellowes logo and banner

Smart Suites™ Voetensteun compact Footrocker

CRC: 80240
  • Schommelbeweging stimuleert de bloedsomloop en vermindert vermoeidheid van de benen
  • Eenvoudige verstelbaar in hoogte, 65-95mm door simpelweg de voetensteun om te draaien
  • Uniek profiel voorkomt dat het product schuift tijdens het schommelen
  • Massageribbels op het platform revitaliseren vermoeide voeten en verminderen stress
  • Compact ontwerp past in werkplekken met beperkte ruimte


Fellowes Zoek een winkel


Vergeet Deze Niet...

Smart Suites™ Voetensteun standaard Footrocker__StandardFootRocker_80239_LF.png

Smart Suites™ Voetensteun standaard Footrocker


UPC Code043859569717
Afmetingen (hxbxd in cm)13.49 x 41.91 x 24.13
Garantie1 jaar gelimiteerd
Materiaal Type
Rated 2.3 out of 5 by 3 reviewers.
Rated 2 out of 5 by Simple appearance, difficult assembly The Foot Rocker is just what we wanted except when assembling it. We got the rocker legs on the platform but could not figure out how to attach the clips that secure the rockers to the platform. The clips have 3 sets of male ends evenly spaced on each while the platform and rockers have 4 sets of female areas that have blanks where the holes should be. I am not a physics expert, but the combination doesn't seem to fit well. Without the clips, the rockers will continually work their way off. December 27, 2013
Rated 1 out of 5 by Impossible to add the locking pieces (B) I ordered this to improve circulation but don't see how it is possible to get the locking strips - part B - onto the rocker. I have pushed forward, pulled apart and can not see a way that the male locking mechanism will fit - there is no space, especially for the middle set - which are the same size on both sides of the locking piece but are supposed to fit into an area with two different sized areas. I will need to return the rocker as the "wheels" fall off without anything locking them on. July 1, 2015
Rated 4 out of 5 by Good Product > Instruction Clarification Like Monkwille the previous reviewer I had the same problem trying to get the clips in on part B after attaching parts A (the rockers) to part C (the platform). Once you have pushed part A on to part C, YOU THEN NEED TO PUSH PART A FORWARD therefore exposing the clip holes the clips on part B need to fit into. Pleas note you need to ensure that part A is flush against part C before trying to push it into the locking position (I had to use quite a bit of pressure to get mine to move). In hindsight I know that theres an arrow on the instructions but perhaps if Fellowes were to add the word 'push' next to the arrow it would make things clearer. February 23, 2015
  • 2016-05-27 T10:57:21.822-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_FT-8024001, prod, sort_default
1-3 of 3