Your shopping cart is currently empty.
Filtration Engineered for IAQP
The success of an IAQP strategy starts with proven air cleaning performance. Fellowes® Array® IAQP-Ready filters are independently tested and validated to provide the performance data engineers need to support sustained IAQP compliance throughout the filter's service life.
Purpose-Built for IAQP
Not every filter is designed for IAQP.
Fellowes IAQP-Ready MERV 16A filters are efficiency-rated for ASHRAE 145.2 & 52.2 by an independent lab and validated per ASHRAE 62.1-2025 to end-of-life performance — supporting up to a 24-month filter life*.
Supports IAQP HVAC Design
Designed to reduce outdoor air by up to 75%**
Available for use in select Array products
Learn More About IAQP
*Actual performance will vary with design conditions, hours of usage and space size.
**Based on third-party modeling and case studies. Actual savings may vary depending on project scope, climate zone, purification technology, space type, and HVAC configuration. Estimates align with performance-based ventilation strategies permitted under ASHRAE 62.1.
Three Stage Filtration
The IAQP-Ready Filter design incorporates a three-stage filtration design consisting of a prefilter and combines high-efficiency particulate filtration using a laminated composite of synthetic non-woven filtration layers with an integrated activated carbon stage. The carbon media is incorporated within the filter pack, allowing airflow to pass through both particulate and gas-phase filtration layers in a single integrated system.
No Concern of Contaminants
Engineered specifically for IAQP applications, the Fellowes IAQP-Ready 360 3-in-1 Filter combines high-efficiency particulate filtration with advanced gas-phase contaminant removal to help control contaminants identified through an ASHRAE Standard 62.1 Indoor Air Quality Procedure (IAQP) analysis.
Unlike filters specified using nominal ratings alone, the Fellowes IAQP-Ready 360 3-in-1 Filter is supported by independent testing that quantifies removal performance for contaminants commonly addressed through IAQP. These contaminant-specific results provide engineers with documented performance data that can be used to evaluate air cleaning effectiveness, support IAQP calculations, and inform performance-based ventilation decisions.
| Compound |
Removal Efficiency |
| Acetaldehyde | 65.50% |
| Acetone | 82.80% |
| Benzene | 80.17% |
| Dichloromethane | 84.30% |
| Formaldehyde | 50.00% |
| Naphthalene | 98.90% |
| Phenol | 99.99% |
| Tetrachloroethylene | 92.70% |
| Toluene | 93.83% |
| Xylene, total | 83.04% |
| Carbon Monoxide | --- |
| PM2.5 | 99.20% |
| Ozone | 99.00% |
| Ammonia | 59.80% |
Using verified performance data that can be incorporated into IAQP calculations, engineers can evaluate contaminant-removal effectiveness against the concentration limits established in ASHRAE Standard 62.1.
Available Across Array IAQP-Ready Solutions
Array® Recess AR1
IAQP-Ready Air Purifier
Learn More
Array® Recess AR2
IAQP-Ready Air Purifier
Learn More
Array® Ceiling AC2
IAQP-Ready Air Purifier
Learn More