Fellowes logo and banner

A: Yes, there is assembly required which should take anywhere from 90 seconds to 10 minutes depending on the table top attachment method you choose. The Levado base features fold out legs that allow you to lock into place with the patent pending SwiftLok™ design. Also, to save time you can attach the table top using the no-tools VersaTop Clamps™. Simply tighten two thumb screws on each side of the base and your table top is secure. Refer to the instruction manual to decide which installation is best for you.

A: It can hold up to 100kg including the weight of the table top.

A: The Levado base accommodates a variety of desktop sizes.

Width: 1187 – 1816mm
Depth: 610mm - 800mm
Thickness: 19mm - 31.15mm

A:Make sure your table top is face down on a soft, clean surface and place base on table. Use the 5mm Allen key to loosen the (8) set screws on the inward side of the cross channels. Expand or contract accordingly until the ends are flush with the table top. Re-secure the (8) set screws. Refer to step 1B in the instruction manual.

How do I change the width of my Levado base to fit?

A: You can use the VersaTop Clamps™ to install your current table top onto the Levado base. Ensure that the table top is within the following measurements:
Width: 1187 – 1816mm
Depth: 610mm - 800mm
Thickness: 19mm - 31.15mm.
Refer to install option 1 in the instruction manual.

How do I fit my current table top onto the Levado base?

A: The height adjusts at 36mm per second. There will not be any noticeable difference in speed with additional weight applied.

A: There are two groups of memory settings, each with two height settings. To toggle between the two users momentarily press the M button and display will read U1 or U2. Up to four memory stop positions can be used to save specific heights of the work surface. To set a specific position: Raise or lower the table to the position you want to save. Press and hold the M button for two seconds, the LED display will blink. This means it has stored the location.

A: To clear storage settings, press and hold M button for 8 seconds until CLR displays.

A: To change the measurement unit, press and hold up and down at same time for 10 seconds.

A: This will depend on your setup. If any of your cables are routing to the floor be sure that they can accommodate the full range of motion up to 1260mm. Refer to Accessory Installation Step 1 in the instruction manual.

How long do my cables need to be to ensure the Levado can move freely?

A: The Levado base is quiet in operation and has a decibel rating range of 46-48.

A: Contact Fellowes Customer Service team and we will be glad to assist you 00800 18101810.

A: If the table feels unbalanced adjust the (4) levelling pads located on the bottom of the feet. Turn clockwise to lower and counter clockwise to raise.

The table isn’t level, how do I fix this?

A: The three stage legs provide height adjustment from 640mm to 1260mm, when using a standard 25mm worktop.

Fellowes, Inc. (the “Company”) warrants the Levado™ Height Adjustable Desk Base (“Product”) to be free from defects in material and workmanship for the time period as set forth below.

The structural frame for a period of fifteen (15) years from the date of original purchase of the product.

All electrical components for a period of seven (7) years from the date of original purchase of the product.

The desktop for a period of ten (10) years from the date of original purchase of the product.

Refer to the manual for full details.